Endmass-Sätze OPUS
aus Hartmetall, Stahl oder Keramik inkl. UKAS-Kalibrierzertifikat
Standardsätze nach DIN 861
Genauigkeitsgrade 2, 1, 0, K
| Satz-Nr. | M.122 | M.112 | M.105 | M.103 | M.88 | M.87 | M.76 | M.47 | M.46 | M.41 | M.32 | M.25 | |
| von / bis | Stufung | Anzahl | |||||||||||
| 0.25 + 0.75 | . | – | – | – | – | – | – | – | – | – | – | 2 | |
| 1.0005 | . | 1 | 1 | – | – | 1 | – | – | – | – | – | – | – |
| 0.0501 – 0.5090 | 0.001 | – | – | – | – | – | – | – | – | – | – | 9 | |
| 1.001 – 1.009 | 9 | 9 | – | 1(1.005) | 9 | 9 | 1(1.005) | 1(1.005) | 9 | 9 | 1(1.005) | – | |
| 1.0025 – 1.0075 | 0.0025 | – | – | 3 | – | – | – | – | – | – | – | – | – |
| 0.51 – 0.59 | 0.01 | – | – | – | – | – | – | – | – | – | – | – | 9 |
| 1.01 – 1.09 | – | – | – | – | – | – | – | – | 9 | 9 | 9 | 9 | – |
| 1.01 – 1.49 | 0.01 | 49 | 49 | 49 | 49 | 49 | 49 | 49 | – | – | – | – | – |
| 0.5 – 9.5 | 0.5 | – | – | – | 19 | 19 | 19 | – | – | – | – | – | |
| 0.5 – 24.5 | 0.5 | 49 | 49 | 49 | – | – | – | – | – | – | – | – | – |
| 0.5 – 0.9 | 0.1 | – | – | – | – | – | – | – | – | – | – | 5 | |
| 1.1 – 1.9 | – | 4 (1.6-1.9) | – | – | – | – | – | 9 | 9 | 9 | 9 | – | – |
| 1.0 – 9.0 | 1.0 | – | – | – | – | – | – | – | – | 9 | 9 | 9 | – |
| 1.0 – 24.0 | – | – | – | – | – | – | – | – | 24 | – | – | – | – |
| 10.0 – 30.0 | 10.0 | – | – | – | – | – | – | 3 | – | – | 3 | – | – |
| 10.0 – 100.0 | 10 | – | – | – | 10 | 10 | 1 (40) | – | 10 | 2 (60 / 100) | 1 (60) | – | |
| 25.0 – 100.0 | 4.0 | – | 4 | 4 | 4 | – | – | 3 (50 / 75 / 100) | 4 | – | – | – | – |