Standard bushings for bore tolerance H7 for use with duMONT push broachesFor proper fit, use bushings marked with the same letter as the broach being used. Up to Ø 22 mm the bushings are with a collar. |
|
A | B-1 | C-1 | D-1 | E-1 | F-1 | ||||||
Ø | SKW | Ø | SKW | Ø | SKW | Ø | SKW | Ø | SKW | Ø | SKW | |
6 | (2) | 11 | (4) | 18 | (6) | 32 | (10) | 52 | (16) | 70 | (20) | |
7 | (2) | 12 | (4) | 19 | (6) | 34 | (10) | 54 | (16) | 75 | (20) | |
8 | (2) | 13 | (4) | 20 | (6) | 35 | (10) | 55 | (16) | 80 | (22) | |
9 | (2) | 14 | (5) | 22 | (6) | 36 | (10) | 56 | (16) | 85 | (22) | |
10 | (3) | 15 | (5) | 24 | (8) | 38 | (10) | 58 | (16) | 90 | (25) | |
16 | (5) | 25 | (8) | 40 | (12) | 60 | (18) | 95 | (25) | |||
17 | (5) | 26 | (8) | 42 | (12) | 62 | (18) | |||||
28 | (8) | 44 | (12) | 64 | (18) | |||||||
30 | (8) | 45 | (14) | 65 | (18) | |||||||
46 | (14) | Larger diameters on request | ||||||||||
48 |
(14)
|
|||||||||||
50 | (14) | |||||||||||
Length = 32 | Length = 42 | Length = 64 | Length = 100 ab Ø 42 = 125 |
Length = 150 | Length = 150 | |||||||
SKW = Standard keyway width in mm. / Ø = Diameter of bushing in mm.. |