Production type broaches duMONTThese broaches are self-supporting, no bushings are required and are designed for production runs. Chamfer feature on request. Possible combinations are: (choice) |
Keyway width | Body diameter | Keyway depth | Broach length | Length of cut in steel 50 |
2 mm | 8 mm | 1.0 mm | 175 mm | 6 - 30 mm |
3 mm | 10 mm | 1.4 mm | 255 mm | 7 - 38 mm |
4 mm | 12 mm | 1.8 mm | 330 mm | 9 - 50 mm |
5 mm | 14 mm | 2.3 mm | 413 mm | 10 - 64 mm |
6 mm | 20 mm | 2.8 mm | 470 mm | 10 - 64 mm |
8 mm | 25 mm | 3.3 mm | 533 mm | 10 - 64 mm |
10 mm | 32 mm | 3.3 mm | 610 mm | 25 - 64 mm |
12 mm | 40 mm | 3.3 mm | 645 mm | 25 - 64 mm |
Shoulder and back are formground to fit the bore. These 3 supporting surfaces extend the full length of the broach.